Aamsco UNICO 4 - Quadruple Light Bands, a 10x Inset Magnifying Mirror, and More

$1,326.32 $1,187 Free Shipping
In stock!, FREE Shipping usually on the business day

There's a 10x inset magnifying mirror, surrounded by a double halo of back-lighting, and 4 bands of back-lighting across the top. Aamsco's Unico 4 backlit mirror is encased in an aluminum Alcover DV casing. Finally, there's a digital clock at bottom center of the main mirror. The LEDs are rated at 30,000 hours, and have a color temperature of 2,600k - 2,800k, Warm White, with a Color Rendering Index (CRI) of 90+. The mirror conforms to ADA guidelines and is suitable for damp locations such as the bathroom, with an IP55 Rating (see IP55 Explained). It is also ETL listed. The light output is at 435 Lumens and the electricity used is only 7 Watts. This is a hardwired mirror and requires an on-off switch or timer. It is non-dimmable. Bear in mind that the amount of light is not intended to light up a room, but rather to lend a bright, decorative accent.
  • Amsco's UNICO 4 has a 10x inset magnifying mirror surrounded by a double LED halo, and four illuminated bands of light at the top. And at bottom center, there's a digital clock visible through the mirror.
  • The backlit lighting bands and halos put out about as much light as that of a 60 Watt bulb; not for room lighting, but decorative and beautiful.
  • Dimensions: 35.43" Wide x 27.55" High x 1.73" Deep, with a tolerence overall of 0.125". The inset mirror has a viewing area with a 4.72" diameter. The entire mirror is housed in an luminum Alcover DV casing.
  • Electrical consumption is only 7 Watts with an output of 435 Lumens. The LED color temperature is 2,600-2,800 degrees Kelvin, or Warm White with a CRI > 90. Non-dimmable. Surface mounted and hardwired, the mirror needs a separate wall switch or a timer.
  • Conforms to ADA guidelines, has an IP55 rating (see explanation) making it suitable for damp locations such as a bathroom, and is ETL listed. 3-Year manufacturer's warranty.

About Aamsco

Aamsco, since 1975, has been manufacturing innovative lighting solutions for companies, wordwide. In the suburbs of New York City, their original vintage lighting company was formed by Bob Rosenzweig to manufacture antique light bulbs. With Bob's creativity, Aamsco began expanding and moved to New Jersy, and ultimately in 2001 relocated to Summerville, South Carolina where Aamsco continues to grow to this day.
IP55 Explained

IP Ratings - Ingress Protection and What it Means

IP Ratings are a classification of the degree of protection against the intrusion of objects including things like hands and fingers, dust, accidental contact, and water. The concept is to provide a more standardized and meaningful set of more specific descriptive terms other than vague marketing lingo, such as "waterproof".

The two digits after the letters "IP" in the rating have separate meanings. The first digit denotes protection against solids. The second digit deals with protection from liquids.
IP55's First digit - 5 - Protection Against Solids
Protection against any large surface of the body, such as the hand, fingers, small objects, tools, most wires, screws, etc, and most dust.

IP55's Second digit - 5 - Protection Against Liquids
Equipment is protected against the ingress of water including dripping water, water from a spray at any angle up to 60 degrees from the vertical, water splashing from any direction, and water from a nozzle (6.3mm) from any direction.

For further information and full ratings charts visit https://en.wikipedia.org/wiki/IP_Code.
3,500k vs. 5,500k

Color Temperature Comparison

Color Temperature is not Brightness The color temperature of any light bulb, including LEDs is measured in degrees Kelvin ("K").  The higher the color temperature, the closer the light is to a clear blue sky day at 10,000° K.  A sunny day at noon has a color temperature of about 5,500° K.  A very bright cloud-covered day, where the sky registers a color temperatue of about 6,500° K., while a "regular" incandescent light bulb has a color temperature of about 3,000° K.

The color temperature of the lighting in your mirror may affect the way people see you in different situations.  It's best, therefore, to choose a lighted makeup mirror with a color temperature to approximate your most frequent environment.

Many of our LED mirrors have their color temperature specified. And some makeup mirrors have adjustable or switchable color temperatures.  For those where color temperature is not specified a reasonable guide is this: For incandescent bulbs, a color temperature of around 3,000° K. is normal.  Fluorescents and LEDs with no color temperature specification have color temperatures around 4,600° K. The chart below can serve as a guide.

If you're planning for an outdoor day, the higher the color temperature the better. For evenings on the town, try to get close to 3,000° K. And for general indoor lighting conditions, color temperatures around 4,500° K. provide the closest match.
require([ 'jquery', 'domReady!' ], function($) { (document.location.href).indexOf("reflectperfection.com")==-1 ? jQuery("#tablogo").attr("src","https://images.reflectperfection.com/549c5ed55f0a2.png") : jQuery("#tablogo").attr("src","images.reflectperfection.com/5bda6b297c7ec.png"); });
About CRI

Color Rendering Index (CRI)

The color rendering index (CRI) is a measure of the ability of a light source to display the colors of various objects faithfully when compared the a natural light source. Light sources with a high CRI value are desirable in color-critical applications such as neonatal care and art restoration. Generally the higher the CRI, the more pleasing to the eye.

The highest possible CRI value is 100 and is frequently achieved by incandescent or "regular" light bulbs. Fluorescent "cool white" bulbs have a CRI of around 50 to 60, but some high-end multi-phosphor fluorescents can go up to 98. LEDs typically have an a CRI around 80, and better, more expensive LEDs can have CRIs up to 97 or 98.

Recently viewed